Inline Particle Size Distribution Measurement Device
Open tenderJapanese title: インライン粒度分布測定装置
Overview
Procurement of an inline particle size distribution measurement device capable of real-time in-situ tracking of particle size and count without sample dilution or sampling. Delivery is required by February 26, 2027, to the National Institute of Advanced Industrial Science and Technology Tsukuba Center Central Office. The device specifications are detailed in the tender documents.
Key Details
- Source: OfficialPublisher
- Notice type: Open tender
- Publication date: September 29, 2026
- Procuring entity: Hashimoto Takuya, Director of Procurement Department, National Institute of Advanced Industrial Science and Technology
- Submission deadline: October 27, 2026, 17:00 JST
- Award method: Lowest-price award
- Status: Active
- Technology relevance: Possible
- Business-action likelihood: Medium – Open competitive bidding with technical qualification requirements and no briefing session; participation requires meeting specific qualification criteria and technical evaluation.
Official Notice
Official Source
National Institute of Advanced Industrial Science and Technology (AIST), an official Japanese procuring entity publishing its own tender notices on its official website.
- Source: National Institute of Advanced Industrial Science and Technology (AIST)
- Official category: Tender notice
- Publication date: September 29, 2026
- Publication: Official publication
Full English Translation
The following English translation was prepared from the original Japanese notice published by National Institute of Advanced Industrial Science and Technology (AIST) on its official website. The translation below is based on the Japanese source text.
Tender Notice
The following is subject to open competitive bidding.
Contract Officer
National Institute of Advanced Industrial Science and Technology
Director of Procurement Department Hashimoto Takuya
1. Items subject to competitive bidding
(1) Procurement subject and quantity: One set of inline particle size distribution measurement device
(2) Characteristics: According to specifications
<Overview>
This device is an inline particle size distribution measurement device that can track the size and number of particles in the system in real-time in-situ without dilution or sampling of the sample.
(3) Delivery deadline: February 26, 2027
(4) Delivery location: National Institute of Advanced Industrial Science and Technology Tsukuba Center Central Office
2. Qualifications required for participants in the competitive bidding
(1) Must not fall under the provisions of Articles 7 and 8 of the Contract Handling Procedures of the National Institute of Advanced Industrial Science and Technology.
(2) Must be rated A, B, or C grade for "manufacture of goods" or "sale of goods" according to the qualification screening procedures related to contracts of the National Institute of Advanced Industrial Science and Technology. Those with equivalent qualifications in the unified qualification system of all ministries are considered to have the same grade.
(3) Small and medium-sized enterprises with technical capabilities that meet any of the items 1 to 7 of Article 17, Paragraph 1 of the qualification screening procedures related to contracts of the National Institute of Advanced Industrial Science and Technology may participate regardless of the grade rating in (2).
(4) Must not have received suspension of designation based on the suspension measures related to contracts of the National Institute of Advanced Industrial Science and Technology during the period from the date of this notice to the bid opening.
(5) Must have received the bid explanation documents.
(6) Must be judged qualified in the technical examination.
3. Place to indicate contract terms, distribution of bid documents, and bid briefing session
(1) Place to indicate contract terms, deadline and place for distribution of bid documents
October 6, 2026 (Tue) 17:00
Delivery at section 8 below. Those wishing to receive the documents should contact section 8 below.
(2) No bid briefing session will be held.
4. Matters concerning participation in the competition
(1) Deadline and place for submission of documents for participation
October 14, 2026 (Wed) 17:00 strict
Submit to section 8 below.
5. Matters concerning bidding
(1) Deadline and place for submission of bid documents
October 27, 2026 (Tue) 17:00 strict (must arrive by mail)
Submit to section 8 below.
(2) Invalid bids
Bids by those who do not have the qualifications required for participation in the competitive bidding shown in this notice, or bids violating the bidding conditions, will be invalid.
6. Matters concerning bid opening
(1) Date, time and place of bid opening
October 28, 2026 (Wed) 14:00
Tsukuba City, Ibaraki Prefecture, Higashi 1-1-1, Central Office Group 1
National Institute of Advanced Industrial Science and Technology Tsukuba Center Central Office Group 1 Building 1-1 3rd Floor, Bid Room (Room 3342)
(2) Method of deciding the successful bidder
The successful bidder shall be the one who made a valid bid at the lowest price within the limit of the estimated price prepared based on Article 14 of the Contract Handling Procedures of the National Institute of Advanced Industrial Science and Technology.
7. Others
(1) Bid and contract guarantees are fully exempted.
(2) Contract document creation is required.
(3) Publication of successful bidder
The successful bidder agrees that the contract name, quantity, contract date, contract amount, name or trade name of the successful bidder, address, and corporate number, etc., will be published. If there is a certain relationship with the National Institute of Advanced Industrial Science and Technology, information on reemployment status and transaction status with the successful bidder will also be published. Information necessary for disclosure may be requested. Details are as per the URL below.
(4) Other details are according to the bid explanation documents.
8. Contact for this matter
National Institute of Advanced Industrial Science and Technology
Procurement Department Procurement Management Office Takada Ikuko
Address: 3rd Floor, Building 1-1, Central Office Group 1, 1-1 Higashi, Tsukuba City, Ibaraki Prefecture 305-8561
Phone: 050-3521-0389 (direct), 029-861-2013 (main)
Email: [email protected]
Show original Japanese notice
2026年9月29日 入札公告
次のとおり一般競争入札に付します。契約担当職国立研究開発法人産業技術総合研究所調達部長橋本卓也1.競争入札に付する事項(1)調達件名及び数量 インライン粒度分布測定装置一式(2)特質等仕様書による<概要>本装置は、試料の希釈やサンプリングを行うことなく、in-situで系内の粒子の大きさと数をリアルタイムに追跡できるインライン粒度分布測定装置である。(3)納入期限 2027年2月26日(4)納入場所 国立研究開発法人産業技術総合研究所つくばセンター中央事業所2.競争入札に参加する者に必要な資格(1)国立研究開発法人産業技術総合研究所の契約事務取扱要領第7条及び第8条の規定に該当しない者であること。(2)国立研究開発法人産業技術総合研究所の契約に係る競争参加者資格審査事務取扱要領により、「物品の製造」又は「物品の販売」のA、B又はCの等級に格付けされている者であること。なお、全省庁統一資格において、当該資格を有する者は、同等級に格付けされているものとみなす。(3)技術力ある中小企業者等であって、国立研究開発法人産業技術総合研究所の契約に係る競争参加者資格審査事務取扱要領第17条第1項第1号から第7号のいずれかに該当する者においては、上記(2)の等級の格付けにかかわらず入札に参加することができる。(4)本公告の日から開札の時までの期間に国立研究開発法人産業技術総合研究所の契約に係る指名停止等の措置要領に基づく指名停止を受けていないこと。(5)入札説明書の交付を受けた者であること。(6)技術審査において適格と判断された者であること。3.契約条項を示す場所、入札説明書の交付及び入札説明会(1)契約条項を示す場所、入札説明書の交付期限及び交付場所2026年10月6日(火) 17:00下記8.において交付する。交付を希望する者は、下記8.にその旨を連絡すること。 (2)入札説明会の日時及び場所本件の入札説明会は開催しない。4.競争参加に関する事項(1)競争参加のための書類の提出期限及び提出場所2026年10月14日(水) 17:00厳守下記8.に提出すること。5.入札に関する事項(1)入札書の提出期限及び提出場所2026年10月27日(火) 17:00厳守(郵便による場合は必着のこと。)下記8.に提出すること。(2)入札の無効本公告に示した競争入札に参加する者に必要な資格を有しない者のした入札、及び入札の条件に違反した入札は無効とする。6.開札に関する事項 (1)開札の日時及び場所2026年10月28日(水) 14:00茨城県つくば市東1-1-1中央事業所1群国立研究開発法人産業技術総合研究所つくばセンター中央事業所1群1-1棟3階 入札室(3342室)(2)落札者の決定方法国立研究開発法人産業技術総合研究所の契約事務取扱要領第14条の規定に基づき作成された予定価格の制限の範囲内で最低価格をもって有効な入札を行った者を落札者とする。7.その他(1)入札保証金及び契約保証金 全部免除(2)契約書の作成の要否 要(3)落札者の公表落札者は、本件の契約に当たって、契約の名称及び数量、契約締結日、契約金額、落札者の商号又は名称、住所及び法人番号等が公表されることについて同意するものとする。また、国立研究開発法人産業技術総合研究所との契約において一定の関係を有する場合にあっては、加えて落札者への再就職の状況や、取引の状況に関する情報が公表されることに同意するものとする。なお、情報の公開に当たり必要となる情報の提供を依頼する場合がある。詳細は以下URLのとおり。(4)その他、詳細は入札説明書による。8.本件に関する問い合わせ先国立研究開発法人産業技術総合研究所調達部調達管理室高田育子(たかだ いくこ)住 所:〒305-8561 茨城県つくば市東1-1-1中央事業所1群1-1棟3階電 話:050-3521-0389(直通)、029-861-2013(代表)メール:[email protected]
Business Signal
Business Relevance
Potential relevance requires a targeted fit check. Confirm the supplier's documented capabilities against the actual requirements and verify a participation route.
- Product fit: Potential
- Current-case feasibility: Unknown
- Evidence confidence: Low
- Supply-chain security: Unknown
Earliest required deadline in the examined route (Japan time): 2026-10-27T17:00:00+09:00
Participation fit
Participation is expected to require appropriate Japanese government procurement eligibility, or cooperation with a suitable Japanese partner holding the required qualification. The eligibility requirements have not been fully reviewed and should be verified against the official tender documents.
This page is based on the official tender notice published by National Institute of Advanced Industrial Science and Technology (AIST) on its official website, with translation and a preliminary business assessment by I.J. Do. The official Japanese text and tender documents are authoritative.
JBid is a beta technology-procurement intelligence service by I.J. Do.