Photovoltaic Cell Current Application System

Open tender

Japanese title: 太陽電池電流印加システム

Energy
About this page
This page is based on the official tender notice and presents information processed, translated, and edited by JBid.

Overview

Procurement of a photovoltaic cell current application system that automatically applies specified current to solar cell modules according to their temperature during IEC 61215 temperature cycle tests. The system also continuously records and monitors voltage, current, and temperature over long periods. Delivery is required by March 17, 2027, to the AIST Tsukuba Center Central Office.

Key Details

  • Source: OfficialPublisher
  • Notice type: Open tender
  • Publication date: October 20, 2026
  • Procuring entity: National Institute of Advanced Industrial Science and Technology (AIST)
  • Tender document receipt deadline: October 27, 2026, 17:00 JST
  • Award method: Lowest-price award
  • Status: Active
  • Technology relevance: Possible
  • Business-action likelihood: High – Open competitive tender with clear deadlines and no stated restrictions on foreign participation; specification documents are available and no briefing session is required.

Supplier actions and deadlines

  • Tender document receipt deadline: 2026-10-27T17:00:00+09:00
  • Participation application deadline: 2026-11-04T17:00:00+09:00
  • Bid submission deadline: 2026-11-13T17:00:00+09:00
  • Bid opening: 2026-11-16T15:15:00+09:00

Official instructions

Official Notice

Official Source

National Institute of Advanced Industrial Science and Technology (AIST), an official Japanese procuring entity publishing its own tender notices on its official website.

  • Source: National Institute of Advanced Industrial Science and Technology (AIST)
  • Official category: Tender notice
  • Publication date: October 20, 2026
  • Publication: Official publication

Full English Translation

The following English translation was prepared from the original Japanese notice published by National Institute of Advanced Industrial Science and Technology (AIST) on its official website. The translation below is based on the Japanese source text.

October 20, 2026
Tender Notice
This is an open competitive tender as follows.
Contract Officer
National Institute of Advanced Industrial Science and Technology
Procurement Department Director Takuya Hashimoto
1. Matters subject to competitive bidding
(1) Procurement subject and quantity: Photovoltaic Cell Current Application System, one set
(2) Characteristics etc.: According to specifications
<Overview>
This device is used in temperature cycle tests according to IEC 61215, etc., to automatically apply a specified current to solar cell modules according to their temperature, and to continuously record and monitor voltage, current, and temperature over long periods during testing.
(3) Delivery deadline: March 17, 2027
(4) Delivery location: National Institute of Advanced Industrial Science and Technology Tsukuba Center Central Office
2. Qualifications required for participants in competitive bidding
(1) Must not fall under the provisions of Articles 7 and 8 of the AIST Contract Handling Procedures.
(2) Must be rated A, B, or C in "manufacture of goods" or "sale of goods" according to AIST's competitive participant qualification screening procedures. Those with equivalent qualifications under the unified qualification system for all ministries are considered as having the same rating.
(3) Technically capable small and medium enterprises etc. that fall under any of items 1 to 7 of Article 17, Paragraph 1 of the AIST competitive participant qualification screening procedures may participate regardless of the rating in (2).
(4) Must not be under suspension of designation based on AIST's contract suspension measures from the date of this notice until the bid opening.
(5) Must have received the bid specification documents.
(6) Must be judged qualified in the technical examination.
3. Location for contract terms and specification distribution and distribution deadline
(1) Location for contract terms and specification distribution deadline and place
October 27, 2026, 17:00
Contact section 8 below for distribution. Those wishing to receive documents must notify section 8 below.
(2) No bid briefing session will be held.
4. Matters concerning participation in competition
(1) Deadline and place for submission of documents for participation in competition
November 4, 2026, 17:00 strict
Submit to section 8 below.
5. Matters concerning bidding
(1) Deadline and place for submission of bids
November 13, 2026, 17:00 strict (must arrive by mail if sent by post)
Submit to section 8 below.
(2) Invalid bids
Bids by those not qualified as required in this notice or violating bid conditions will be invalid.
6. Matters concerning bid opening
(1) Date, time and place of bid opening
November 16, 2026, 15:15
Ibaraki Prefecture, Tsukuba City, Higashi 1-1-1, Central Office Group 1
National Institute of Advanced Industrial Science and Technology Tsukuba Center Central Office Group 1, Building 1-1, 3rd floor, Bid Room (Room 3342)
(2) Method of deciding successful bidder
The successful bidder will be the one who submits a valid bid with the lowest price within the range of the predetermined price based on Article 14 of the AIST Contract Handling Procedures.
7. Others
(1) Bid and contract guarantees: fully exempted
(2) Contract document creation: required
(3) Publication of successful bidder
The successful bidder agrees that the contract name, quantity, contract date, contract amount, bidder's trade name or name, address, and corporate number, etc., will be published. If there is a certain relationship with AIST, information on reemployment status and transaction status with the successful bidder may also be published. Necessary information may be requested for disclosure. Details at the URL below.
(4) Other details according to bid specifications.
8. Contact for this matter
National Institute of Advanced Industrial Science and Technology
Procurement Department, Procurement Section 2, Kawamura
Address: 1-1-1 Higashi, Tsukuba City, Ibaraki Prefecture 305-8561, Central Office Group 1, Building 1-1, 3rd floor
Phone: 050-3521-1331 (direct), 029-860-5549 (main)
Email: [email protected]
Show original Japanese notice

2026年10月20日 入札公告

次のとおり一般競争入札に付します。契約担当職国立研究開発法人産業技術総合研究所調達部長橋本卓也1.競争入札に付する事項(1)調達件名及び数量 太陽電池電流印加システム一式(2)特質等仕様書による<概要>本装置は、IEC 61215の温度サイクル試験等において、太陽電池モジュールの温度に応じて所定の電流を自動的にモジュールに印加し、また、試験時の電圧・電流・温度を長時間連続して記録・監視するために使用するものである。(3)納入期限 2027年3月17日(4)納入場所 国立研究開発法人産業技術総合研究所つくばセンター中央事業所2.競争入札に参加する者に必要な資格(1)国立研究開発法人産業技術総合研究所の契約事務取扱要領第7条及び第8条の規定に該当しない者であること。(2)国立研究開発法人産業技術総合研究所の契約に係る競争参加者資格審査事務取扱要領により、「物品の製造」又は「物品の販売」のA、B又はCの等級に格付けされている者であること。なお、全省庁統一資格において、当該資格を有する者は、同等級に格付けされているものとみなす。(3)技術力ある中小企業者等であって、国立研究開発法人産業技術総合研究所の契約に係る競争参加者資格審査事務取扱要領第17条第1項第1号から第7号のいずれかに該当する者においては、上記(2)の等級の格付けにかかわらず入札に参加することができる。(4)本公告の日から開札の時までの期間に国立研究開発法人産業技術総合研究所の契約に係る指名停止等の措置要領に基づく指名停止を受けていないこと。(5)入札説明書の交付を受けた者であること。(6)技術審査において適格と判断された者であること。3.契約条項を示す場所、入札説明書の交付及び入札説明会(1)契約条項を示す場所、入札説明書の交付期限及び交付場所2026年10月27日(火) 17:00下記8.において交付する。交付を希望する者は、下記8.にその旨を連絡すること。 (2)入札説明会の日時及び場所本件の入札説明会は開催しない。4.競争参加に関する事項(1)競争参加のための書類の提出期限及び提出場所2026年11月4日(水) 17:00厳守下記8.に提出すること。5.入札に関する事項(1)入札書の提出期限及び提出場所2026年11月13日(金) 17:00厳守(郵便による場合は必着のこと。)下記8.に提出すること。(2)入札の無効本公告に示した競争入札に参加する者に必要な資格を有しない者のした入札、及び入札の条件に違反した入札は無効とする。6.開札に関する事項 (1)開札の日時及び場所2026年11月16日(月) 15:15茨城県つくば市東1-1-1中央事業所1群国立研究開発法人産業技術総合研究所つくばセンター中央事業所1群1-1棟3階 入札室(3342室)(2)落札者の決定方法国立研究開発法人産業技術総合研究所の契約事務取扱要領第14条の規定に基づき作成された予定価格の制限の範囲内で最低価格をもって有効な入札を行った者を落札者とする。7.その他(1)入札保証金及び契約保証金 全部免除(2)契約書の作成の要否 要(3)落札者の公表落札者は、本件の契約に当たって、契約の名称及び数量、契約締結日、契約金額、落札者の商号又は名称、住所及び法人番号等が公表されることについて同意するものとする。また、国立研究開発法人産業技術総合研究所との契約において一定の関係を有する場合にあっては、加えて落札者への再就職の状況や、取引の状況に関する情報が公表されることに同意するものとする。なお、情報の公開に当たり必要となる情報の提供を依頼する場合がある。詳細は以下URLのとおり。(4)その他、詳細は入札説明書による。8.本件に関する問い合わせ先国立研究開発法人産業技術総合研究所調達部調達二室川村住 所:〒305-8561 茨城県つくば市東1-1-1中央事業所1群1-1棟3階電 話:050-3521-1331(直通)、029-860-5549(代表)メール:[email protected]

Business Signal

Business Relevance

Potential relevance requires a targeted fit check. Confirm the supplier's documented capabilities against the actual requirements and verify a participation route.

  • Product fit: Potential
  • Current-case feasibility: Unknown
  • Evidence confidence: Low
  • Supply-chain security: Unknown

Participation fit

Participation is expected to require appropriate Japanese government procurement eligibility, or cooperation with a suitable Japanese partner holding the required qualification. The eligibility requirements have not been fully reviewed and should be verified against the official tender documents.

This page is based on the official tender notice published by National Institute of Advanced Industrial Science and Technology (AIST) on its official website, with translation and a preliminary business assessment by I.J. Do. The official Japanese text and tender documents are authoritative.

JBid is a beta technology-procurement intelligence service by I.J. Do.

Back to daily list

Source: 国立研究開発法人産業技術総合研究所(AIST). Translation and editing: JBid / I.J. Do. The official Japanese text is authoritative.